Research Article
BibTex RIS Cite

ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE

Year 2013, Volume: 28 Issue: 2, 87 - 93, 27.05.2013
https://doi.org/10.7161/anajas.2013.282.87

Abstract

The safe design of greenhouses is of great importance and requires special attention. Computeraided design and information technologies allow faster, easier and more reliable designs. Such designs were taking long hours when performed with classical methods by hand. Today, there are numerous computer softwares being able to perform calculations and dimensioning of greenhouse systems reliably and practically. This study was mainly focused on analysis and design of greenhouses by using SAP2000 computer software to achieve more accurate results in less time by incorporating computer use into the process. A sample greenhouse design was performed and analyzed by using SAP2000 software, and the findings regarding safe design and analysis were reported. 

References

  • Anonymous, 1997. Design loads for buildings TS 498, Turkish Standards Institution. Ankara, p 24.
  • Anonymous, 2003. Greenhouses: Design and ConstructionPart 1: Commercial Production Greenhouses, TS EN 13031-1, Turkish Standards Institution. Ankara, p 88.
  • Anonymous, 2004. SAP2000 v8 Educational, Computers and Structures, Inc. Berkeley, Cal.
  • Anonymous, 2002. Steel Sizing Guide, Software Series for Analyzing the Structures with Finite Elements, Computers & Engineering 1992-2002, www.compengineering.com.
  • Baytorun A.N. 1995. Greenhouses. CU. Agricultural Faculty General Pub. No: 110. Lecture Note No: 29. p. 406. Adana.
  • Kocabaş, S. 2005. Thesis Analysis and Design of Steel Constructions with the Aid of SAP 2000. MSc Thesis. Department of Civil Engineering, Institute of Natural and Applied Science University of Cukurova p.120 . Adana.
  • Tunaboyu, O. 2007. Computer Aided Structural Design, Department of Civil Engineering, Institute of Natural and applied Science University of Osmangazi, p.178, Eskisehir.
  • Yakut, M. 2007. Usage of Information Technology to Analyze and Design of Steel Truss Structures. MSc Thesis. Department of Civil Engineering. Institute of Natural and Applied Science University of Ondokuzmayis. 94 s, Samsun.
  • Yuksel A.N. 2004. Greenhouse Construction Technique. Hasad Publishing Ltd. Co., Istanbul, 287p.

SERALARIN SAP2000 PROGRAMI İLE ANALİZ VE TASARIMI

Year 2013, Volume: 28 Issue: 2, 87 - 93, 27.05.2013
https://doi.org/10.7161/anajas.2013.282.87

Abstract

Pahalı yapılar olan seraların tasarımının güvenli yapılması büyük önem taşımakta olup dikkat istemektedir. Klasik yöntemlerle yapıldığında uzun zaman ve işlemler gerektiren hesapların bilgisayar, programlama ve bilgi teknolojilerinin yardımıyla yapılması kolay, hızlı ve güvenli tasarıma olanak sağlamaktadır. Günümüzde seraların tasarımı amacıyla güvenli ve pratik şekilde istenilen açıklık ve yük durumundaki sistemlerin hesap ve boyutlandırmasını yapan çok sayıda bilgisayar yazılımı bulunmaktadır. Bu çalışmada bilgisayar kullanımını en üst düzeyde tutarak, daha az zamanda daha doğru sonuçlara ulaşılması için seraların SAP2000 programı ile analizi ve tasarımına ışık tutulması amaçlanmıştır. Bu amaçla örnek bir sera projesi SAP2000 programı ile çözülüp irdelenmiş, analiz ve tasarıma ilişkin bazı belirlemelerde bulunulmuştur.

References

  • Anonymous, 1997. Design loads for buildings TS 498, Turkish Standards Institution. Ankara, p 24.
  • Anonymous, 2003. Greenhouses: Design and ConstructionPart 1: Commercial Production Greenhouses, TS EN 13031-1, Turkish Standards Institution. Ankara, p 88.
  • Anonymous, 2004. SAP2000 v8 Educational, Computers and Structures, Inc. Berkeley, Cal.
  • Anonymous, 2002. Steel Sizing Guide, Software Series for Analyzing the Structures with Finite Elements, Computers & Engineering 1992-2002, www.compengineering.com.
  • Baytorun A.N. 1995. Greenhouses. CU. Agricultural Faculty General Pub. No: 110. Lecture Note No: 29. p. 406. Adana.
  • Kocabaş, S. 2005. Thesis Analysis and Design of Steel Constructions with the Aid of SAP 2000. MSc Thesis. Department of Civil Engineering, Institute of Natural and Applied Science University of Cukurova p.120 . Adana.
  • Tunaboyu, O. 2007. Computer Aided Structural Design, Department of Civil Engineering, Institute of Natural and applied Science University of Osmangazi, p.178, Eskisehir.
  • Yakut, M. 2007. Usage of Information Technology to Analyze and Design of Steel Truss Structures. MSc Thesis. Department of Civil Engineering. Institute of Natural and Applied Science University of Ondokuzmayis. 94 s, Samsun.
  • Yuksel A.N. 2004. Greenhouse Construction Technique. Hasad Publishing Ltd. Co., Istanbul, 287p.
There are 9 citations in total.

Details

Primary Language English
Journal Section Agricultural Structures and Irrigation
Authors

Sedat Karaman

Şahin Sözen

Sırrı Şahin

Publication Date May 27, 2013
Published in Issue Year 2013 Volume: 28 Issue: 2

Cite

APA Karaman, S., Sözen, Ş., & Şahin, S. (2013). ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE. Anadolu Tarım Bilimleri Dergisi, 28(2), 87-93. https://doi.org/10.7161/anajas.2013.282.87
AMA Karaman S, Sözen Ş, Şahin S. ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE. ANAJAS. May 2013;28(2):87-93. doi:10.7161/anajas.2013.282.87
Chicago Karaman, Sedat, Şahin Sözen, and Sırrı Şahin. “ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE”. Anadolu Tarım Bilimleri Dergisi 28, no. 2 (May 2013): 87-93. https://doi.org/10.7161/anajas.2013.282.87.
EndNote Karaman S, Sözen Ş, Şahin S (May 1, 2013) ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE. Anadolu Tarım Bilimleri Dergisi 28 2 87–93.
IEEE S. Karaman, Ş. Sözen, and S. Şahin, “ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE”, ANAJAS, vol. 28, no. 2, pp. 87–93, 2013, doi: 10.7161/anajas.2013.282.87.
ISNAD Karaman, Sedat et al. “ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE”. Anadolu Tarım Bilimleri Dergisi 28/2 (May 2013), 87-93. https://doi.org/10.7161/anajas.2013.282.87.
JAMA Karaman S, Sözen Ş, Şahin S. ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE. ANAJAS. 2013;28:87–93.
MLA Karaman, Sedat et al. “ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE”. Anadolu Tarım Bilimleri Dergisi, vol. 28, no. 2, 2013, pp. 87-93, doi:10.7161/anajas.2013.282.87.
Vancouver Karaman S, Sözen Ş, Şahin S. ANALYSIS AND DESIGN OF GREENHOUSES WITH SAP2000 SOFTWARE. ANAJAS. 2013;28(2):87-93.
Online ISSN: 1308-8769